Sprocket for 80ton Hitachi Sumitom SCX800-2 Crawler Crane
The order for Sumitomo SCX800-2 Sprockets is finished today, the customer received this sprockets today.
Let us introduce the SCX800-2 Sprocket Tumbler information:
a. DRIVE SPROCKETS are Cast steel, heat treated; one per side frame. Track drive sprocket assembly bolt-coupled to 3-stage planetary reduction gear unit outer case as an integral part of shoe-in type traction motor. Sealed between parts of rotation and non-rotation of the motor with floating seal.
b. Order quantity is 4 pcs and was delivered by Sea.

Other undercarriage parts for Hitachi Sumitomo SCX800-2 includes SCX800-2 Track Shoe, SCX800-2 Lower Roller, Scx800-2 upper Roller and Idler assy also can be supplied by us.
We can supply full undercarriage parts for SCX800-2 Crawler Crane, if you has requirement, please contact us freely: [email protected]
About the Crawler Crane
TRAVEL AND STEERING:
A bi-directional, shoe-in type axial piston
hydraulic motor bolt-couples with drive sprocket
thru 3-stage planetary reduction gear unit outer
case at each crawler side frame end for travel
and steer. Straight-line travel (forward or reverse),
pivot or differential turns, and counter-rotation for
spin turns available.
Brake — Spring-applied, power hydraulically released
multiple wet-disc type automatic brake; located
within hydraulic motor. Brakes automatically
set when travel levers are in neutral or when
engine is shut down.
Travel speed — Two stages; 1.8/1.3km/hr. (based on
flat, level and firm supporting surface, and
under the conditions that no load must be
applied and front-end att. must be the 9.5m
basic boom only).
Gradeability — 30% (17°) permissible based on basic
machine without front-end attachment.