News

The Emergency Measures Of Crawler Crane

The Emergency Measures of Crawler Crane
 

When the crawler crane chassis parts damage, according to the different fault conditions,

can use the following method for emergency measures, we can learn together:

 


1, Brake wheel cylinder, brake fluid leak or break points pump pipe, pump pipe joint and tin,  copper sheet to do a small cushion, seal line, tighten the screws, fracture or clamping, curly, wheel brake.  But doing so may result in unilateral brake, driving safety first. 


2, Brake master cylinder, brake fluid is insufficient, can be substituted for alcohol or liquor,

special circumstances can be usedinstead of water

Brake cup, will be for a bowl of hot water soak for 10 minutes to 20 minutes, remove the oil bowl cup

returned to the original size.


3, Crane
chassis parts of clutch friction plate skid ablation, ablation is not
very serious friction plate, can be used to flip.   Such as ablation
serious, usable cotton or canvas layer (thickness and the original
agreement, friction slices) with wire or wires of orifice plate, this is
fixed.Vehicle should be smooth start, quickly shifting action.



4, Pull
rod joint is broken, bumper or other places do not affect driving,
similar to the total length of a ball joint screw fracture, replace the
ball section, installed in the steering knuckle arm, and a nut, screw
section and hammer riveting.

 

5, Crane chassis parts 3 axle differential gear damage, for example, rear axle differential damage to any one, can be a bridge, bridge shaft removed, continue to run.If before the differential damage, the center button to delete the rear wheel drive.

 

 


Above
is the small make up to introduce the crane chassis parts damage need
to be emergency, hope to be of service, our company has always been to
high-quality products, reasonable price, considerate service, feedback
the general new old customer with all sincerity.