Crawler Cranes Use Cautions During The Run-In Period
The crane is overloaded for a long period of time during the run-in period, resulting in the frequent occurrence of
early machine failures. This not only affects the normal use of the machine, but also shortens the service life of the machine.Therefore, attention should be paid to the use and maintenance of the running-in period of the crane. The crane manufacturer introduced the use and maintenance of the running-in period.
1. As the crane is a special plant, the operator should receive the training and guidance from the manufacturer, have a thorough understanding of the structure and performance of the machine, and gain certain operation and maintenance experience to operate the machine. Before operating the machine, be sure to read the instructions for use and maintenance first, operate and maintain according to the instructions.
.
2. Pay attention to the work load during the run-in period. The work load during the run-in period should not exceed 80% of the rated work load, and an appropriate workload should be arranged to prevent the overheating caused by the continuous operation of the machine for a long time.
3. Pay attention to the instructions of each instrument. Observe the anomalies and stop them in a timely manner. If the cause is not found and the fault is not removed, stop the operation.
4. CAUTION always check the level and quality of oil, hydraulic oil, coolant, brake fluid, and fuel oil (water), and check the tightness of the machine. The lack of excess oil in the inspection should be analyzed. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended that grease be applied to each lubrication point in each class during the running-in period.
5. Keep the machine clean and adjust and tighten the loose parts in time to prevent them from wearing out or causing parts to be lost due to looseness.
6. At the end of the run-in period, the machine shall be subject to compulsory maintenance, inspection and adjustment work, and attention shall be paid to the replacement of the oil.
In short, pay attention to and implement the maintenance and maintenance of the equipment during the run-in period, which will reduce the occurrence of early failures, extend the service life, and improve the operating efficiency, so that the machine will bring you more benefits.
Any enquiry about our undercarriage parts, pls notify with us freely.
Email ID : info@valuetrackpart.com