Nippon Sharyo DH800 Track Shoe

Nippon Sharyo DH800 Track Shoe have high flexural strength and wear resistance. In order to avoid the high stress caused by sandwiching stones between the two adjacent track shoes, the pitch of track shoes should be adjusted accurately.

Nippon Sharyo DH800 Track Shoe

Nippon Sharyo DH800 Track Shoe maybe in your requirement. So will show you the information for Nippon Sharyo DH800 Track Shoe as follows:

Improper high speed driving is prohibited. The crawler running mechanism that runs at a high speed will cause the pin bushes and drive wheels, track sections and guide wheels, crawler sections, and roller wheels to collide with each other under impact load, resulting in driving gear tooth surfaces, pin bushings, and guide wheel treads. Premature wear on the roller treads and track treads can also cause cracks in pin bushes and track shoes, damage to the flanges of the rollers, and breakage of the track pins and pins; in addition, impact forces can also make chassis parts of the crawler frame and main frame. Cracks, bends, or cracks occur. Therefore, it should be avoided as much as possible in the high speed under the sharp corner.

Nippon Sharyo DH800 Track Shoe.jpg

Nippon Sharyo DH800 Track Shoe Detail

Product Name	Nippon Sharyo DH800 Track Shoe
Material	35SiMn, 28SiMnMo, 35SiMnRe
Technology	Casting
Heat Treatment	Whole quenching and tempering, surface hardening
Warranty	2500 Working Hours
Delivery Time	Within 7-25 days after received payment

Crawler Crane Parts for Below Models (Part of)

Related Parts for Nippon Sharyo DH800 Track Shoe

Crawler Crane Undercarriage Parts:

Track Shoe(Pad), Track(Bottom) Roller, Top(Upper) Roller, Sprocket, Idler Assy.