1. What is application of Track Shoe for Terex Demag CC2400
Track Shoe for Terex Demag CC2400 is used to support the weight of the crane body and roll on the track shoes so that the machine travels along the Track Shoe.
In some special load conditions or arm conditions, force only on some track rollers, so the arrangement of track rollers is middle sparse and two ends dense.
Track Shoe for Terex Demag CC2400 also call Crawler Pads, Crawler Treads, Crawler Belts Crane Track Plates, Crane Track Pads, Crane Bottom Plates, Crane Chain Pads.
2. Advantage
We use high quality sand casting, can improve the quality of the Track Shoe for Terex Demag CC2400 from the appearance of the product can be seen very clearly. My company according to the original factory plate technology requirements, shaft hole coaxiality is high, the template in the work, the deformation force is small, improve the service life of Track Shoe for Terex Demag CC2400.Our pin shaft is made of 40Cr material. After heat treatment, further processing, can reduce the friction with the plate shaft hole.
3. Heat Treated Advantage
All casting should be Austenitized at 900°C for one Hr per every inch of casting thickness.
Then Quenched on water and Tempered for sufficient amount of temperature and time.
All heat treatment should be carried out after castings reach temperature lower than 200°C.
The general hardness after QT to be 230-320 BHN.
4. Pin
The Pins are heat treated and fine machining, that can extend the service life.
5. Tips:
Determining the crane position according to the actual situation of the hoisting site, if the ground is soft, smooth track with the sleepers or steel plate. Obstacles within the effective radius and the effective height should be cleared to avoid collision.
Hot Tags: track shoe for terex demag cc2400, manufacturers, suppliers, dealer, quality, OEM